Cisco Catalyst 3850 WS-C3850-48F-L 48-Port PoE+ Gigabit Switch w/ 2*PSU

$79.99 Buy It Now or Best Offer
free,30-Day Returns

Seller Store ocdepot
(53904) 99.4%,

Location: Garden Grove, California
Ships to: US,
Item: 365206991877

Restocking Fee:No
Return shipping will be paid by:Seller
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money back or replacement (buyer’s choice)
Cisco:Cisco
Type:Power over Ethernet Switch
WS-C3850-48F-L:WS-C3850-48F-L
MPN:WS-C3850-48F-L

TESTING & COSMETIC NOTES: This is a USED WORKING item in GOOD cosmetic condition that IS THOROUGHLY TESTED and is GUARANTEED WORKING AS DESCRIBED The unit has been reset to the factory default settings. See console log below. Notched power cable is NOT included. COMPONENTS INCLUDED IN THIS AUCTION: • (1) – CISCO 3850 WS-C3850-48F-L 48-PORT POE+ GIGABIT SWITCH • (2) – CISCO PWR-C1-1100WAC POWER SUPPLY • (1) – PAIR OF RACKMOUNT EARREPLACEMENT GUARANTEE – ITEM IS GUARANTEED WORKING AS DESCRIBED: Please see our test notes above for further information. Our descriptions, and photos represent our best effort to relay all pertinent information about a product. We assure the buyer that they will receive an item with the level of operation shown in the photos and described in our Test and Cosmetic notes. When you receive a Guaranteed item from OC Depot, it should perform as described. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 30 days of receiving the item. If a replacement is not available we will honor the terms of our Money-Back Guarantee. We do not refund the shipping charges because we are unable to recoup these costs.ADDITIONAL INFORMATION: The following is the Console Log from this item:Booting…Interface GE 0 link down***ERROR: PHY link is downThe “IP_ADDR” environment variable is not set.Getting rest of imageReading full image into memory…Check base package header …: done = 16384Getting rest of imageReading full image into memory….doneReading full base package into memory…: done = 32798679Bundle Image————————————–Kernel Address : 0x537783c0Kernel Size : 0x438356/4424534Initramfs Address : 0x53bb0716Initramfs Size : 0x1ab68c1/28010689Compression Format: mzipBootable image at @ ram:0x537783c0Bootable image segment 0 address range [0x81100000, 0x81da5280] is in range [0x80180000, 0x90000000].@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@boot_system: 623Loading Linux kernel with entry point 0x81895bf0 …Bootloader: Done loading app on core_mask: 0xf### Launching Linux Kernel (flags = 0x5)Linux version 4.9.187 (xelinux@sjc-xelinux3) (gcc version 5.3.0 (GCC) ) #1 SMP Wed Nov 4 12:00:14 PST 2020CVMSEG size: 2 cache lines (256 bytes)Cavium Inc. SDK-5.1.0bootconsole [early0] enabledCPU0 revision is: 000d900a (Cavium Octeon II)Checking for the multiply/shift bug… no.Checking for the daddiu bug… no.%IOSXEBOOT-196b8e7f94a0e8871bfaf1fe032a4609-new_cksum: (rp/0): 4%IOSXEBOOT-196b8e7f94a0e8871bfaf1fe032a4609-saved_cksum: (rp/0): 4Final tar file: mcu_ucode_bundle_6_2_0.tarBoth links down, not waiting for other switchesSwitch number is 1 Restricted Rights LegendUse, duplication, or disclosure by the Government issubject to restrictions as set forth in subparagraph(c) of the Commercial Computer Software – RestrictedRights clause at FAR sec. 52.227-19 and subparagraph(c) (1) (ii) of the Rights in Technical Data and ComputerSoftware clause at DFARS sec. 252.227-7013. Cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706Cisco IOS Software [Gibraltar], Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 16.12.5b, RELEASE SOFTWARE (fc3)Technical Support: www.cisco.com/techsupportCopyright (c) 1986-2021 by Cisco Systems, Inc.Compiled Thu 25-Mar-21 13:09 by mcpreThis software version supports only Smart Licensing as the software licensing mechanism.PLEASE READ THE FOLLOWING TERMS CAREFULLY. INSTALLING THE LICENSE ORLICENSE KEY PROVIDED FOR ANY CISCO SOFTWARE PRODUCT, PRODUCT FEATURE,AND/OR SUBSEQUENTLY PROVIDED SOFTWARE FEATURES (COLLECTIVELY, THE”SOFTWARE”), AND/OR USING SUCH SOFTWARE CONSTITUTES YOUR FULLACCEPTANCE OF THE FOLLOWING TERMS. YOU MUST NOT PROCEED FURTHER IF YOUARE NOT WILLING TO BE BOUND BY ALL THE TERMS SET FORTH HEREIN.Your use of the Software is subject to the Cisco End User License Agreement(EULA) and any relevant supplemental terms (SEULA) found atwww.cisco.com/c/en/us/about/legal/cloud-and-software/software-terms.html.You hereby acknowledge and agree that certain Software and/or features arelicensed for a particular term, that the license to such Software and/orfeatures is valid only for the applicable term and that such Software and/orfeatures may be shut down or otherwise terminated by Cisco after expirationof the applicable license term (e.g., 90-day trial period). Cisco reservesthe right to terminate any such Software feature electronically or by anyother means available. While Cisco may provide alerts, it is your soleresponsibility to monitor your usage of any such term Software feature toensure that your systems and networks are prepared for a shutdown of theSoftware feature.% Checking backup nvram% No config present. Using default configFIPS: Flash Key Check : BeginFIPS: Flash Key Check : End, Not Found, FIPS Mode Not EnabledAll TCP AO KDF Tests Passcisco WS-C3850-48P (MIPS) processor (revision K0) with 794888K/6147K bytes of memory.Processor board ID FOC1739V1J52048K bytes of non-volatile configuration memory.4194304K bytes of physical memory.250456K bytes of Crash Files at crashinfo:.1609272K bytes of Flash at flash:.0K bytes of WebUI ODM Files at webui:.Base Ethernet MAC Address : 34:db:fd:a0:ac:80Motherboard Assembly Number : 73-14442-10Motherboard Serial Number : FOC173825P4Model Revision Number : K0Motherboard Revision Number : A0Model Number : WS-C3850-48PSystem Serial Number : FOC1739V1J5Press RETURN to get started!*Oct 30 22:29:53.687: Rommon debug: debugFlagsStr[1], flags[0x1]*Oct 30 22:29:56.229: %SMART_LIC-6-EXPORT_CONTROLLED: Usage of export controlled features is not allowed*Oct 30 22:29:56.235: %SMART_LIC-6-AGENT_ENABLED: Smart Agent for Licensing is enabled*Oct 30 22:29:56.235: %SMART_LIC-6-EXPORT_CONTROLLED: Usage of export controlled features is not allowed*Oct 30 22:29:56.236: %SMART_LIC-6-AGENT_ENABLED: Smart Agent for Licensing is enabled*Oct 30 22:29:56.236: %SMART_LIC-6-EXPORT_CONTROLLED: Usage of export controlled features is not allowed*Oct 30 22:29:57.009: %IOSXE_RP_NV-3-NV_ACCESS_FAIL: Initial read of NVRAM contents failed*Oct 30 22:29:57.124: %IOSXE_RP_NV-3-BACKUP_NV_ACCESS_FAIL: Initial read of backup NVRAM contents failed*Oct 30 22:29:59.925: %SMART_LIC-6-AGENT_READY: Smart Agent for Licensing is initialized*Oct 30 22:29:59.926: %SMART_LIC-6-AGENT_ENABLED: Smart Agent for Licensing is enabled*Oct 30 22:29:59.934: %SMART_LIC-6-EXPORT_CONTROLLED: Usage of export controlled features is not allowed*Oct 30 22:30:02.761: %SMART_LIC-6-HA_ROLE_CHANGED: Smart Agent HA role changedto Active.RA Tracing tool registry return: 0*Oct 30 22:30:08.618: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan*Oct 30 22:30:10.171: %LINK-3-UPDOWN: Interface Lsmpi18/3, changed state to up*Oct 30 22:30:10.173: %LINK-3-UPDOWN: Interface EOBC18/1, changed state to up*Oct 30 22:30:10.174: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to down*Oct 30 22:30:10.174: %LINK-3-UPDOWN: Interface LIIN18/2, changed state to up*Oct 30 22:30:10.438: %HMANRP-6-HMAN_IOS_CHANNEL_INFO: HMAN-IOS channel event for switch 1: EMP_RELAY: Channel UP!*Oct 30 22:29:34.810: %STACKMGR-6-STACK_LINK_CHANGE: Switch 1 R0/0: stack_mgr: Stack port 1 on Switch 1 is nocable*Oct 30 22:29:34.810: %STACKMGR-6-STACK_LINK_CHANGE: Switch 1 R0/0: stack_mgr: Stack port 2 on Switch 1 is down*Oct 30 22:29:34.810: %STACKMGR-6-STACK_LINK_CHANGE: Switch 1 R0/0: stack_mgr: Stack port 2 on Switch 1 is nocable*Oct 30 22:29:34.811: %STACKMGR-4-SWITCH_ADDED: Switch 1 R0/0: stack_mgr: Switch 1 has been added to the stack.*Oct 30 22:29:39.172: %STACKMGR-4-SWITCH_ADDED: Switch 1 R0/0: stack_mgr: Switch 1 has been added to the stack.*Oct 30 22:29:41.174: %STACKMGR-4-SWITCH_ADDED: Switch 1 R0/0: stack_mgr: Switch 1 has been added to the stack.*Oct 30 22:29:41.174: %STACKMGR-6-ACTIVE_ELECTED: Switch 1 R0/0: stack_mgr: Switch 1 has been elected ACTIVE.*Oct 30 22:30:10.454: %HMANRP-6-EMP_NO_ELECTION_INFO: Could not elect active EMP switch, setting emp active switch to 0: EMP_RELAY: Could not elect switch withmgmt port UP*Oct 30 22:30:11.293: %LINEPROTO-5-UPDOWN: Line protocol on Interface Lsmpi18/3, changed state to up*Oct 30 22:30:11.294: %LINEPROTO-5-UPDOWN: Line protocol on Interface EOBC18/1,changed state to up*Oct 30 22:30:11.294: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to down*Oct 30 22:30:11.295: %LINEPROTO-5-UPDOWN: Line protocol on Interface LIIN18/2,changed state to up*Oct 30 22:30:12.782: %SYS-5-CONFIG_P: Configured programmatically by process MGMT VRF Process from console as vty0*Oct 30 22:30:12.804: %IOSXE_MGMTVRF-6-CREATE_SUCCESS_INFO: Management vrf Mgmt-vrf created with ID 1, ipv4 table-id 0x1, ipv6 table-id 0x1E000001*Oct 30 22:30:12.859: %SYS-5-CONFIG_P: Configured programmatically by process MGMT VRF Process from console as vty0*Oct 30 22:30:13.466: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down*Oct 30 22:30:14.488: %SYS-6-STARTUP_CONFIG_IGNORED: System startup configuration is ignored based on the configuration register setting.*Oct 30 22:30:15.029: %SYS-5-CONFIG_P: Configured programmatically by process CPP MQC QoS Policy manager from console as vty1*Oct 30 22:30:15.296: %SYS-5-CONFIG_P: Configured programmatically by process PnP Agent Discovery from console as vty1*Oct 30 22:30:15.483: %SMART_LIC-5-EVAL_START: Entering evaluation period*Oct 30 22:30:15.992: %ONEP_BASE-6-SS_ENABLED: ONEP: Service set Base was enabled by Default*Oct 30 22:30:16.716: %EVENT_TRACE-6-ENABLE: Trace already enabled.*Oct 30 22:30:16.716: %EVENT_TRACE-6-ENABLE: Trace already enabled.*Oct 30 22:30:16.720: %EVENT_TRACE-6-ENABLE: Trace already enabled.*Oct 30 22:30:16.720: %EVENT_TRACE-6-ENABLE: Trace already enabled.*Oct 30 22:30:17.282: %SYS-5-RESTART: System restarted –Cisco IOS Software [Gibraltar], Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 16.12.5b, RELEASE SOFTWARE (fc3)Technical Support: www.cisco.com/techsupportCopyright (c) 1986-2021 by Cisco Systems, Inc.Compiled Thu 25-Mar-21 13:09 by mcpre*Oct 30 22:30:18.331: %LINK-3-UPDOWN: Interface GigabitEthernet1/1/1, changed state to down*Oct 30 22:30:18.332: %LINK-3-UPDOWN: Interface GigabitEthernet1/1/2, changed state to down*Oct 30 22:30:18.335: %LINK-3-UPDOWN: Interface GigabitEthernet1/1/3, changed state to down*Oct 30 22:30:18.336: %LINK-3-UPDOWN: Interface GigabitEthernet1/1/4, changed state to down*Oct 30 22:30:18.339: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/1, changed state to down*Oct 30 22:30:18.342: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/2, changed state to down*Oct 30 22:30:18.345: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/3, changed state to down*Oct 30 22:30:18.348: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/4, changed state to down*Oct 30 22:30:19.275: %LINK-3-UPDOWN: Interface Vlan1, changed state to up*Oct 30 22:30:19.333: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1/1, changed state to down*Oct 30 22:30:19.333: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1/2, changed state to down*Oct 30 22:30:19.335: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1/3, changed state to down*Oct 30 22:30:19.336: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1/4, changed state to down*Oct 30 22:30:19.341: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/1, changed state to down*Oct 30 22:30:19.346: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/2, changed state to down*Oct 30 22:30:19.346: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/3, changed state to down*Oct 30 22:30:19.348: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/4, changed state to down*Oct 30 22:30:19.669: %SYS-6-BOOTTIME: Time taken to reboot after reload = 246seconds*Oct 30 22:30:22.823: %HMANRP-6-EMP_NO_ELECTION_INFO: Could not elect active EMP switch, setting emp active switch to 0: EMP_RELAY: Could not elect switch withmgmt port UPSwitch>*Oct 30 22:30:25.216: %SYS-5-CONFIG_P: Configured programmatically by process EPM CREATE DEFAULT CWA URL ACL from console as console*Oct 30 22:30:28.840: %PKI-2-NON_AUTHORITATIVE_CLOCK: PKI functions can not be initialized until an authoritative time source, like NTP, can be obtained.*Oct 30 22:30:29.797: %PKI-6-TRUSTPOINT_CREATE: Trustpoint: CISCO_IDEVID_SUDI created succesfully*Oct 30 22:30:29.849: %CRYPTO_ENGINE-5-KEY_ADDITION: A key named CISCO_IDEVID_SUDI has been generated or imported by pki-sudi*Oct 30 22:30:29.965: %PKI-6-TRUSTPOINT_CREATE: Trustpoint: CISCO_IDEVID_SUDI0 created succesfullySwitch>enSwitch# Please Click Here to Visit Our Store at “> at ” src=”https://www.ocdepot.com/template/Rounded_Middle_Right.gif” /> at ” src=”https://www.ocdepot.com/template/Rounded_Left_Bottom.gif” /> at “> at ” src=”https://www.ocdepot.com/template/Rounded_Middle_Bottom.gif” /> at ” src=”https://www.ocdepot.com/template/Rounded_Right_Bottom.gif” /> SearchBy37 – 264506 | Loc: E13 | L: Rob | T: Rob | PM: Nick | QTY: 0 | Plan: L FREESHIP – 20LBS | 22.00″x22.00″x5.00″ 30.00lbs | Start: $0.00 | BIN: $79.99 | | 2024-10-31 | | 51268

Frequently Asked Questions About Cisco Catalyst 3850 WS-C3850-48F-L 48-Port PoE+ Gigabit Switch w/ 2*PSU in My Website

xdvrdrones.com is the best online shopping platform where you can buy Cisco Catalyst 3850 WS-C3850-48F-L 48-Port PoE+ Gigabit Switch w/ 2*PSU from renowned brand(s). xdvrdrones.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Cisco Catalyst 3850 WS-C3850-48F-L 48-Port PoE+ Gigabit Switch w/ 2*PSU on xdvrdrones.com?